Leaks can occur in clean water installation pipes at any time. Whether it’s because the pipe broke or because the connection didn’t start again. This condition certainly can make clean water wasteful, so the use of water becomes wasteful, and water use bills also increase professional plumber singapore at cheap rate. When you face such this issue, there must be always the choice to work with the cheap plumber in singapore since the professional plumber knows all about the plumbing issues. To find out if there is a leak on the installation pipe, proceed as follows:
– Cover all tap water, and observe the water meter. If the indicator of the water flow indicator still continues to rotate, it is certain that there is a leak in the water installation. It could be on a piping system or on a water tap or toilet.
– If the water installation uses a pressure pump, observe the pump work. If the pump suddenly works, there is a high probability that there will also be a leak in the clean water installation.
Leaking on the faucets and toilets is easier to know because it is invisible. What is rather difficult is finding a leak point in the piping system. Finding a leaking point in a pipe is easier if the installation pipe is channeled through the roof of the house and the wall. Humid spots on the wall or roof are suspect. Repair can be done immediately.
Another case if the installation pipe is planted on the bottom or under the floor. This condition makes it difficult for us to find a leaky point. Water seepage will not appear on the floor, because water seeps directly into the ground. If this happens, then you should make a new clean water installation through the roof and walls of the house. This step is easier, cheaper, and faster than if you have to dismantle the floor.